A stopped or unstable machine can quickly block production, delay delivery or generate significant costs.

Eureka Electroméca intervenes to find the real cause of a breakdown and propose a suitable solution, whether the problem is electrical, mechanical, pneumatic or hydraulic.

Possible services:

• fault finding on stopped, unstable or intermittent machines
• electrical, mechanical, pneumatic and simple hydraulic diagnostics
• analysis of triggers, overheating, noises, vibrations, blockages or power losses
• replacement of defective components
• recommissioning after a breakdown or prolonged shutdown
• identification of parts and communication with suppliers
• intervention report with observations and recommendations

The objective is simple: to understand the problem, to return the equipment to service when possible, and to prevent the same fault from recurring unnecessarily.

Some electrical faults are not immediately visible: abnormal heating, poor tightening, degraded insulation, intermittent fault, overload or component at the end of its life.

Eureka Electroméca uses appropriate measuring tools to diagnose installations, motors, cables, cabinets and electrical components.

Possible services:

• thermal control of electrical cabinets, motors, terminals, contactors, circuit breakers and components
• search for abnormal heating
• insulation measurement on motors, cables, resistors or equipment
• diagnosis of differential tripping
• continuity, voltage, power supply and wiring control
• verification before returning to service
• analysis of intermittent electrical faults

These checks allow for the detection of invisible problems before they cause a failure, machine downtime or a risk of overheating.

Preventive maintenance helps to reduce unexpected downtime, extend the lifespan of equipment and detect signs of wear before failure.

Eureka Electroméca offers simple and concrete checks, tailored to SMEs, workshops and small productions that do not always have a complete internal maintenance service.

Possible services:

• visual and functional inspection of equipment
• control of electrical and mechanical elements
• checking of tightenings, wear, play, leaks and overheating
• control of motors, transmissions, sensors, cables, connectors and control organs
• light technical cleaning and functional checking
• intervention report with monitored points, defects found and recommendations
• proposal for a simple maintenance plan according to the equipment

The aim is to anticipate problems without setting up a heavy or costly contract.

Many machine breakdowns have a mechanical origin: worn bearing, tired transmission, excessive play, blocked part, abnormal friction or misalignment.

Eureka Electroméca intervenes on simple mechanical sub-assemblies to restore equipment to working order or to identify parts to be replaced.

Possible services:

• replacement of bearings, bushes, belts, chains and couplings
• extraction of bearings, pulleys, rings or blocked parts
• search for play, wear, noise, vibration or friction
• control of mechanical transmissions
• dismantling and reassembling of simple sub-assemblies
• adaptation or repair of small mechanical parts
• assistance in identifying replacement parts

The electromechanical approach allows for addressing the problem as a whole: motor, transmission, sensor, wiring, control and mechanics.

Pneumatic and hydraulic circuits are often essential to the operation of machines: cylinders, distributors, fittings, hoses, regulators, solenoid valves or position sensors.

Eureka Electroméca works on simple systems to diagnose leaks, pressure losses, irregular movements or faulty components.

Possible services:

• search for compressed air leaks
• diagnosis of slow, weak, irregular or blocked movements
• replacement of cylinders, distributors, fittings, pipes, hoses and regulators
• adjustment of pressure, flow, timing or damping
• functionality check of pneumatic circuits
• diagnosis of simple hydraulic leaks
• replacement of simple hydraulic components as feasible
• assistance in identifying compatible components

An air leak or poor adjustment can reduce a machine's performance and increase energy consumption. A targeted check often allows for a quick recovery of reliability.

When a support, stop, casing or small metal structure breaks, it is not always necessary to replace the entire assembly.

Eureka Electroméca can carry out small metal repairs or simple adaptations to extend the use of equipment or allow for a quick return to service.

Possible services:

• repair of supports, frames, casings, stops or broken parts
• small metal adaptations
• simple mechanical reinforcements
• MIG/MAG welding as feasible
• repair of loose, cracked or torn elements
• simple modification to improve the use or maintenance of equipment

Repairs are carried out according to the context, the use of the part and safety constraints. Critical elements or those subject to certification must undergo a specific analysis.

Some small parts are difficult to find, take too long to obtain or are too expensive to replace when they are no longer available separately.

Eureka Electroméca can help to take dimensions, understand the function of a part and propose a simple solution: adaptation, 3D printing, external machining or equivalent replacement.

Possible services:

• taking measurements on existing part or mechanical housing
• dimensional survey with caliper
• identification of the mechanical function of a part
• assistance in reproducing or adapting a small part
• preparation of information for external machining
• 3D printing of simple and non-critical small parts
• creation of prototypes, covers, supports, guides, spacers, shims, buttons or protections
• possible materials depending on use: PLA, PETG, PET, ...

3D printing is particularly useful for prototypes, protections, supports, test parts and quick adaptations. It is not intended for critical, structural, food, high temperature or safety parts without specific validation.

Beyond troubleshooting, Eureka Electroméca can offer simple improvements to make a machine more reliable, more practical or easier to maintain.

The aim is not to completely transform the equipment, but to provide concrete solutions to recurring problems.

Possible services:

• replacement of obsolete components
• addition or replacement of sensors
• improvement of ergonomics or safety
• reliability of old machines
• reduction of repetitive breakdowns
• adaptation of small mechanical parts
• improvement of connections, supports or protections
• simple documentation after intervention
• technical recommendations to facilitate future maintenance

A well-thought-out small modification can sometimes prevent repetitive breakdowns, simplify use or reduce intervention time during future troubleshooting.

When a specific machine breaks down, the manufacturer or supplier often knows their equipment very well, but they do not always have someone available quickly on site.

Eureka Electroméca can act as a local technical relay between your company, your machine and the manufacturer's support.

Possible services:

• on-site presence during remote troubleshooting with the manufacturer
• technical exchange with support in French or English
• carrying out requested measurements, tests, disassemblies or verifications
• identification of components, connections, errors or symptoms
• transmission of photos, videos, measurements and observations
• support during an update, a restart or a service procedure
• assistance in understanding the manufacturer's technical instructions

This service is particularly useful for foreign machines, specific equipment, service procedures, updates or complex diagnostics.

The objective: to avoid approximate exchanges, speed up diagnostics and facilitate re-commissioning.

Eureka Electroméca can also act as a local technician in Belgium for manufacturers, machine suppliers or technical services located outside Belgium.

The principle is simple: the manufacturer retains technical control of their machine, and Eureka Electroméca provides on-site presence, electromechanical skills and local support to the Belgian client.

Possible services:

• on-site intervention at a Belgian client for a manufacturer or supplier
• remote assistance with the manufacturer's technical support
• simple electrical, mechanical, pneumatic or hydraulic measurements
• wiring checks, connections, sensors, actuators or components
• simple replacement of components under the manufacturer's instructions
• support during an update, a restart or an installation
• taking photos, videos, measurements and observations
• clear intervention report after site visit

This service often helps to avoid international travel for a simple intervention, reduce delays, limit costs and improve the responsiveness of technical support.

It is a local, practical and more sustainable solution for manufacturers who wish to support their clients in Belgium without systematically mobilising a foreign technician.